Industry News

The working principle of the Magnetic Separator

2023-12-18

The working principle of the Magnetic Separator: after the slurry flows into the tank through the ore box, under the action of the water flow from the ore spray pipe, the ore particles enter the ore feed area of the tank in a loose state. Under the action of the magnetic field, the magnetic mineral particles are magnetically aggregated to form a "magnet cluster" or "magnet chain". The "magnet cluster" or "magnet chain" moves to the magnetic poles in the pulp and is adsorbed on the cylinder. The gangue and other non-magnetic minerals fall off during turning, and the "magnet cluster" or "magnetic chain" that is finally attracted to the surface of the cylinder is the concentrate. The concentrate goes with the cylinder to the weakest part of the edge of the magnetic system, and is discharged into the concentrate tank under the action of the flushing water jet from the unloading water pipe. If it is a full-magnetic magnetic roller, the unloading is carried out with a brush roller. Non-magnetic or weakly magnetic minerals are left in the slurry and discharged out of the tank with the slurry, which is the tailings. Magnetic Separator is your good choice.